Advice: +44 20 380 832 99

Find out the correct ring size

How do i measure the ring size correctly? Measure and determine the correct ring size

Determine the right ring size - no problem! Measure and find out the ring size - there are 3 methods:

The measurement with a ring template can be carried out very quickly and is ideal if you want to secretly determine the ring size.

For the second method with the ring tape measure you need the help of your partner. This is useful if the engagement ring you received does not fit.
The third method also uses a paper strip to measure directly on the finger.

1. Determine ring size by using a ring template

Here you can download the GERMAN-ENGAGEMNTRING.com ring size template (PDF, 32 KB), measure the inner diameter and determine the correct ring size.

The use of the ring size template is very simple: Take - of course as inconspicuous as possible - a ring that your partner often wears, print the template according to instructions and compare the ring with the information on the template. Done.

Ring template, also ring size template: measuring the correct ring size, measure and determine size

2. Find out the size of the ring with a free ring tape measure

If your partner already knows about the engagement, simply use a ring tape measure. You can easily find out the right ring size directly on your partners finger.

The measuring tape works similar to a belt and is very easy to use. When the ring tape measure is conveniently placed on your partner's ring finger, you can read the correct size of the inside diameter in the viewing window.

Ring size tool: measure ring size, determine and find out

Quote

The most frequently bought ring size for women is 54 - after all, over 80% of all women have sizes between 48 and 56.

3. Paper strip & ruler: determine without a ring

How can I determine the correct ring size without a ring? We have a simple method. All you need is a pen, a strip of paper and a ruler.

Preparations
First cut an 8 - 10 cm long, maximum 1 cm wide strip from a sheet of paper.

Measuring with the paper strip. This is how it works

Determine ring size with paper strip and without a ring

  1. Wrap the strip lengthwise around your ring finger. Make sure that the strip is not too loose.
  2. Mark the end of the overlap with a straight line.
  3. Measure the marked route. The result in millimetres corresponds to your ring size.

Example: A length of 5.4 cm corresponds to ring size 54.

Perform control measurements to compensate for measurement fluctuations. Repeat steps 1 - 3 a few times and then determine the mean value of your measurements.

Measure the average ring size correctly

Determine the size of the ring correctly – these things are important: When, where and how to measure?

When to measure? The finger is thinner in the morning and in cold weather

The finger thickness varies throughout the day and at changing temperatures. In the morning the finger is thinner than in the evening; in winter and in a cold environment it is thinner than in the summer.

Also, in the course of the years and with pregnancy the circumference of the finger changes.The left and right ring fingers usually have different circumferences. And the phalanges is the widest part of the ring finger of most women.

Therefore, we recommend to take the measurements shortly before you order and - if possible - carry it out several times at different times of the day. This will give you a feeling for the circumference of the finger, which is crucial for a pleasant wearing comfort of the ring.

Where to measure? Which point of the finger is measured?

The fingers of the left and right hand have a different thickness. What sounds trivial at first turns out to be a problem if the ring does not fit. Before the first measurement, determine on which finger and on which hand the ring should be worn. Engagement rings, for example, are usually worn on the ring finger of the left hand.

Important: The circumference of the finger must be measured in the right place. Normally, rings are pushed over the second phalanx of the finger (the so-called middle phalanx or phalanx media). They then sit in the middle between the second and third phalanx, the phalanx proximalis.

Exceptions are thumb rings or if very many rings are worn on one finger.

How to measure? Practical example with 5 measurements of the finger circumference

In order to determine the appropriate ring size, we have carried out and recorded five measurements over several days in this practical example. The first at noon, the finger circumference was 53.5 mm, the second in the evening at medium temperature. The finger already had a little more circumference at this time.

The third measurement took place early in the morning after getting up and led to the result with the smallest finger circumference (53 mm). The fourth measurement was made on a warm summer evening and the fifth on the following day at noon.

To determine the mean finger circumference, add all measurement results and divide this value by the number of measurements.

Average ring size is 54

We sell and adjust many rings and can therefore tell you exactly which sizes are most in demand. The most common ring size for women's rings is 54. More than 80% of all women's hands fit ring sizes between 48 and 56. The majority of men wear rings in sizes 57 to 62.

If you do not have any further information, please select a size within these ranges. If you think partner's finger has a bigger circumfence, choose a size in the upper range up to 56. If your sweetheart has rather small fingers, a size of 52 and below will fit most likely.

International conversion table for ring sizes

Simply use our international ring size table to find out the size on the basis of the inner diameter (∅ mm). The conversion table for rings takes into account the diameter in mm. It facilitates the conversion of sizes commonly used in America and Canada (USA/CAN), England (UK), France and the EU (FRA/EU), Japan (JPN) and Germany (GER).

Table for conversion of ring sizes:

∅ mm GER EU/FRA ENG USA/CAN JPN
12,7 40 0 C 1.4 (1) 0,2
13,0 41 1 C 1/2 1.8 (1-) 1,1
13,3 42 2 D 1/2 2.2 (2) 2,1
13,7 43 3 E 1/2 2.6 (2-) 3,1
14,0 44 4 F 3.0 (2-) 4,0
14,3 45 5 G 3.4 (3) 5,0
14,6 46 6 G 1/2 3.7 (3-) 5,9
14,9 47 7 H 1/2 4.1 (4) 6,9
15,3 48 8 I 1/2 4.5 (4-) 7,8
15,6 49 9 J 4.9 (4-) 8,8
15,9 50 10 K 5.3 (5) 9,7
16,3 51 11 K 1/2 5.7 (5-) 10,7
16,6 52 12 L 1/2 6.1 (6) 11,6
16,9 53 13 M 1/2 6.4 (6) 12,6
17,2 54 14 N 6.8 (6-) 13,6
17,5 55 15 O 7.2 (7) 14,5
17,8 56 16 P 7.6 (7-) 15,5
18,2 57 17 P 1/2 8.0 (7-) 16,4
18,5 58 18 Q 1/2 8.4 (8) 17,4
18,8 59 19 R 8.7 (8-) 18,3
19,1 60 20 S 9.1 (9) 19,3
19,4 61 21 T 9.5 (9-) 20,2
19,7 62 22 T 1/2 9.9 (9-) 21,2
20,1 63 23 U 1/2 10.3 (10) 22,2
20,4 64 24 V 10.7 (10-) 23,1
20,7 65 25 W 11.0 (11) 24,1
21,0 66 26 X 11.4 (11) 25,0
21,3 67 27 X 1/2 11.8 (11-) 26,0
21,6 68 28 Y 1/2 12.2 (12) 26,9
22,0 69 29 Z 1/2 12.6 (12-) 27,9
22,3 70 30 Z +1 13.0 (12-) 28,8

Save and take with you: The ring size table as a free PDF (61 KB).

Change the size of the ring? With us free of charge!

We want you to be completely satisfied with the piece of jewellery you have purchased from us. If you have accidentally ordered a ring in the wrong size, this is no problem. One of our services is to change the ring size (for non-engraved rings) free of charge. We also take over the costs for the return for you. All you have to do is determine the right ring size, and we will do the rest!

The free shipping process is very easy with our return portal.

Note: Once we have received your piece of jewellery, we will need approximately 3-5 business days to change the ring size. If you wish to change the ring size by more than 4 ring sizes or if the ring is already engraved, the processing can take up to 7 working days.

As engraved rings usually cannot be changed, we charge a handling fee of 35,- € for changing the size of engraved rings.

Lean more about the engagement

We have more interesting information about the engagement for you! 12 facts you didn't know yet and tips for the perfect engagement.

Call a Specialist
+44 20 380 832 99

Call now